Milwaukee M4 2-Speed Screwdriver

m4 screwdriver milwaukee Milwaukee M4 2 Speed Screwdriver
Milwaukee Tool has just introduced the new M4 2-Speed Screwdriver which signifies their commitment to the 4V category or cordless tools.
“At Milwaukee, we remain focused on our core users. Our goal for M4 is to create a variety of tools that demand the compact size of the new M4 battery,” said Derek Erickson, product manager, Milwaukee Tool. “The M4 Screwdriver is ideal for a manufacturing setting where users need to quickly perform the same tasks hundreds of time per day.”
Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new screwdriver offers improved torque control during repetitive applications. Two speeds, 200 and 600 RPM, offer further user control for precision work.
At only 244 millimeters in length and under one pound, the M4 Screwdriver is easy to use with one hand, featuring 1/4″ quick-change chuck for one-handed bit changes.
Specifications:
M4 Screwdriver
21-position clutch setting with auto shut-off
44 inch-pounds of torque
2-speed gearbox: 200/600 RPM

The following two tabs change content below.
timothy dahl profile Milwaukee M4 2 Speed Screwdriver

Timothy Dahl

Founder/EIC at Charles & Hudson
Timothy’s background includes stints at This Old House, ELLE DECOR, Metropolitan Home and Woman’s Day. His work has been published on Wired Design, Bob Vila, DIY Network, The Family Handyman and Popular Mechanics and he has been featured on the Martha Stewart radio show and as a speaker at the ALT Design Summit, K/BIS and the National Hardware Show.
  • larrycrowe

    Hello.

    I have two poles in the middle of my garage that makes pulling into the garage and opening car doors difficult. I would like to replace the beam with a longer beam. Do you have any info regarding this with distance that would be required and how this would be done?

    The ceiling is quite high so the thickness of the beam is no problem. I would be ok with just moving the poles as far as possible to not be in line with the car doors. I am not sure how you would shore up the area while building for the new beam replacement.

    Any assistance or guidance would be appreciated.
    thanks,
    Larry