Dewalt’s New 12V Xtreme Subcompact Drills and Drivers

Dewalt is getting into the subcompact game with their new line of Xtreme Subcompact brushless 12V Max tools. These are designed for electrical, drywall, remodeling, automotive, metalworking, woodworking, and masonry applications.

The new Xtreme series includes Brushless 12V MAX* Drill/Driver, the Brushless 12V MAX* Impact Driver, the Brushless 12V MAX* Screwdriver, the Brushless 12V MAX* 3/8-inch Impact Wrench, and the Brushless 12V MAX* Hammerdrill.

Specific details about each tool as well as a complete list of products is included below:

• The 12V MAX* Brushless Drill/Driver (DCD701) is optimized for use in small pilot holes and can handle up to a 1/2-inch spade bit. The tool is 5.97 inches long and 1.91 pounds (tool-only). It’s lightweight and fits in tight places. It offers up to 250 UWO (Units Watts Out), a variable speed trigger, and 2-speed transmission. A belt clip and a bright LED are included on the tool’s foot.
• The 12V MAX* Brushless Impact Driver (DCF801) works well with small fasteners and can handle up to a 1/4-inch lag bolt. The tool is 5.05 inches long and 1.75 pounds (tool only). It achieves up to 1,450 in-lbs. of max torque, making it a powerful, subcompact choice. The impact driver features 3 modes: High Speed, Low Speed, and Precision Drive™ Mode. Precision Drive™ Mode can pause the Impact Driver for one second before impacting. This protects the fastener and material surface, providing users with control during applications that require a high level of precision. The tool includes three LEDs on the nosecone, a variable speed trigger, and a belt clip.
• The 12V MAX* Brushless Screwdriver (DCF601) is best used with hard-to-reach fasteners that need the control of its 15-setting clutch. The tool is 4.81-inches long, 1.5 pounds (tool only), yet is capable of up to 200 UWO of power. It features a belt clip and three LEDs on the nosecone.
• The 12V MAX* 3/8-inch Brushless Impact Wrench (DCF902) with a Hog Ring Anvil is designed for hard-to-reach nuts and bolts. The tool is 5.11 inches long and 1.73 pounds (tool only), achieving up to 1,500 in-lbs. of max fastening torque and 2,400 in-lbs. of breakaway torque. It features a variable speed trigger and has 3 modes: High Speed, Low Speed, and Precision Wrench™ Mode. The Precision Wrench™ Mode helps prevent overtightening and run-off. The Impact Wrench also features three LEDs on the nosecone to help illuminate work areas.
• The 12V MAX* Brushless Hammerdrill (DCD706) is optimized for creating variety of holes in brick and block, but can also tackle smaller holes in concrete. The tool is 6.6 inches long and 2.04 pounds (tool-only). It’s subcompact, lightweight, and fits in tight places. It offers up to 250 UWO, 25,500 BPM, a variable speed trigger, and a 2-speed transmission. A belt clip and LED are included on the tool’s foot.

In addition to the efficiency and performance offered by brushless technology in the XTREME Subcompact Series™ tools, the 12V MAX* lithium ion battery included with each tool kit now features a Fuel Gauge charge indicator. With a quick button press, three LEDs display remaining battery charge. The 12V MAX 2.0Ah Battery (DCB122) is included in kits, and the 12V MAX 3.0Ah Battery (DCB124) is available separately in single and double packs. DEWALT 12V MAX* Batteries with Fuel Gauge are compatible with prior DEWALT 12V MAX* tools and chargers and come with a 2-year limited warranty.

For professionals looking for capable, subcompact tools that perform tough applications in hard to reach spaces, the XTREME Subcompact Series™ tools are the ultimate choice. Available in summer 2019, each tool comes with a three-year limited warranty, one-year free service contract, and a 90-day money back guarantee.

SKU LIST / PRICING