No central heating, no shower, and the boiler is refusing to play ball at the worst possible moment.
After a boiler breakdown, your first instinct will likely be to search online and phone someone, but it’s important to ensure that the heating engineer you call has the correct expertise, accreditations, and is upfront with pricing.
In the Department for Energy Security and Net Zero Winter 2025 report, 75% of respondents reported having a gas boiler as their primary form of heating.
Follow these steps to locate the right heating engineer in your area, and not panic-act:
Summary of this article:
- Assess if your issue is a repair or an emergency
- Simple actions you can take prior to contacting a heating engineer
- Where to source a reliable, competent heating engineer
- Key questions to ask the engineer/business
- Establish costs and be aware of what you may be liable for
- Helpful information to have ready for your visit
- Summary

Boiler breakdown: assess if your issue is a repair or an emergency
There may be more to your broken boiler than simply requiring a standard call-out for repair, and it’s worth triaging whether it requires more urgent intervention.
If you detect a gas smell, do not create a spark, turn appliances on/off, ignite anything, or attempt to locate the source of the smell. Evacuate your home and contact the National Gas Emergency Service: 0800 111 999 (GB) or 0800 002 001 (NI).
Similarly, evacuate the property if there is a Carbon Monoxide alert, and seek prompt medical attention. Again, if a gas-fitting may be the cause, raise an incident with the Gas Emergency Service.
In these circumstances, locating a boiler engineer will have to take a backseat to addressing a potential life-threatening issue.
Simple actions you can take prior to contacting a heating engineer
In many cases, the problem will be elsewhere and does not necessarily indicate that the boiler itself requires repair, e.g. controls, power, etc.
Ensure that your heating controls are set appropriately, and rule out a general power failure – i.e. investigate the fuse box, but avoid repeatedly resetting a fuse if necessary, or top up funds on a smart meter if applicable.
Take note of any boiler fault codes, consult your boiler’s manual, and determine if the fault is explained and if there are any remedial actions the end-user can undertake. Take note of the boiler pressure, but refrain from removing panels and manipulating controls that you aren’t familiar with.
If it’s extremely cold, consider that your external condensate drainpipe may have become frozen, and can be treated with warm (not boiling) water, provided you can access this safely, and the boiler guidance instructs this. Do not risk injury by climbing/overstretching to gain access to the pipe.
If all else fails, stop investigating and call a boiler engineer, armed with the above knowledge to speed up their diagnosis.
Where to source a reliable, competent heating engineer
Using your postcode, search for local engineers with experience and competency for your particular boiler. MyJobQuote’s heating engineer directory lets you browse engineers, get multiple quotes, and describe your fault to a selection of engineers. Be descriptive, including whether CH / HW (or both) have been affected, timing, and if there are any dependents/vulnerable persons in the household.
Browse your search results, noting businesses whose remit is predominantly repairing existing boilers, rather than selling/installing new systems, and enquire whether your boiler falls within their portfolio of work.
Ensure that they have the requisite skills and competency for your fuel / type of heating system, as an electric boiler or heat pump engineer may not be suited to repair your gas boiler, or vice versa. All engineers performing work on regulated gas fittings must be registered on the Gas Safe Register, and this should apply to your boiler, whether new or existing.
Confirm that:
- The business you are calling is actively registered with Gas Safe; and
- The engineer assigned to your repair holds valid accreditation to repair your system, including their Gas Safe certification, independent of the business they work under (do not rely solely on their listing/webpage).
It is advisable to view the engineer’s Gas Safe card, including the photo and expiry date (front of the card) and endorsed appliances (reverse), to ensure the engineer is authorised to repair your boiler.
Key questions to ask the engineer/business
The following will help to clarify whether a heating Engineer’s Visit is suitable, and will save you time and money, particularly where there are other, more available engineers nearby:
- When will you be able to visit me? Understand what you can reasonably expect, in terms of when you can expect a call-back, and/or visit from the engineer.
- Which engineer will visit? Verify that this has the requisite background/experience and certification, as discussed above.
- Do you charge a call-out fee for diagnosis, and if so, to what extent? Clarify if this includes call-out + time, or is just to cover the engineer’s time travelling to your location, etc.
- Are there additional call-out costs? E.g. evenings, weekends, out-of-hours/emergency callout, etc.
- If the fault cannot be resolved immediately due to waiting on a part, will this be communicated, and would I need to consent to this order being placed?
As with any consumer service, read recent feedback/reviews, looking for common themes, especially around response times, turnaround, and management of issues, rather than relying on any one review alone.
Again, be mindful if there is urgency required, that the engineer responding to you may not be able to visit you imminently, so check this explicitly.
While you wait, have a plan for staying warm. Layer up, close doors, and draught-proof any gaps, and use a portable electric heater in the room you’re actually in rather than trying to heat the whole house. For washing, boil a kettle, or use a gym or workplace shower if you can. Check on anyone elderly, very young, or unwell first.
Establish costs and be aware of what you may be liable for
You may receive a cost to call out and/or diagnose, but should not assume that this equates to a price to effect a repair, if required. Ask to be provided with details, including parts, labour, VAT, and any subsequent inspection/call-out, where relevant, and to be notified prior to proceeding with any works.
You may also receive an estimate, though the final cost to remediate the fault may not be ascertainable until further investigation, so clarify this with the engineer, either during or after the call-out.
At this point, the engineer will be able to advise on the root cause and the remedial works recommended. If significant, or in the context of any historic faults, you may wish to have a price for repairing, versus replacing, your boiler, to inform your decision.
If you will be paying for any remedial works, be sure to check if you hold any warranty, servicing, and/or home insurance policy, which could contribute towards the cost, but which may mandate use of a nominated repairer/engineer in some circumstances.
If you are a tenant, notify your Landlord/Agent, who are typically responsible for ensuring CH / HW, and do not authorise any expensive repairs on their behalf, barring any safety-related instruction by a competent third party, e.g. a Gas Safe engineer.
Helpful information to have ready for your visit
Provide the heating engineer with unobstructed, safe access, removing any items that may obstruct their assessment/remediation, and confine any animals to a separate area of the property, to prevent distraction.
It’s helpful to have your boiler’s user guide, warranty, and details of the issue to hand, and, where feasible, evidence of the fault, e.g. photographic record, but there’s no need to ‘investigate’ and unmake the appliance to facilitate this.
Allow the engineer to assess your boiler, describe the symptoms, and refrain from intervening. On completion, seek confirmation that the appliance is fit-for-purpose, whether a follow-up is required, and what may need to occur, including whether any parts need to be sourced, etc.
Retain any receipts, invoices, and notes, and reference these if your boiler fails again, to assist your subsequent contact with the heating engineer/business.
Once you’re back up and running, regular heating maintenance is the best way to avoid a repeat, starting with an annual service by a Gas Safe registered engineer who can catch worn parts before they fail. Between services, keep an eye on the boiler’s pressure, and switch the heating on briefly now and then in warmer months so the boiler doesn’t sit idle.
Summary
Of course, when you don’t have your heating, you want to restore it as quickly as possible, and will naturally rush to identify and contact a boiler repair engineer; however, as above, it’s best to take time to make sure you find the right engineer and protect yourself from any unnecessary complications or cost afterward. Whatever caused your boiler breakdown, a few checks, the right questions, and a clear quote will get your heating back with fewer surprises.



